Yuku free message boards

The hands are easy. I've put CG wrist posts on my Matilda & Junkyard Jack, and a couple of Otakus. All you do is drill into the arm with a 1/8" drill bit. You'll have to widen the hole a little at a time until you can get the CG wrist post to go in. You'll be done in ten minutes.

The only things to watch out for, are if the arm is very skinny (look at the size of the CG post next to the arm and see if you'll have enough plastic left around it) and make sure you don't drill deep enough to hit the elbow hardware. I had to cut the posts short for Matilda, I couldn't drill far enough.

I've never had a DML figure, so it's possible you'd encounter some kind of surprise, but so far this technique has worked well on 3 very different types of figures. I also recommend using the CG version 1.5 hands, because they've got the good wrist, and the posts don't have the extra bits at the end like the 2.0 ones do.