This is the first(and only) doll I made with a ballgag about 6 years ago. I used a red glass bead an earring wire component and black electrical tape sewn into
a harness for her head. Next time I make one, it'll probably be with leather.
If you look close you can see the 'drool' coming from the sides of her mouth.
I'm not sure how many people will be interested in this stuff, but I wanted to share what I did since I know at least one person is interested.
First off, practice on a cheapo throw away head. Don't ever try anything you've never done before on your 'baby'.
Tools are Exacto knife(or other craft knife/blade), earring wire thingy with the loop on the end (or a straight piece of wire that can bent into hoops on either end), something to tie it to your vic-er doll(leather, tape, string...yadda), needle nose pliers & wire cutters. Not everything is in the pic.
Choose a victim.
Begin by giving her a 'dental extraction'. If you don't know what that is, carefully take your blade and slooooowly cut her teeth out. I normally start from the left top side slice to the right, then go from right to left on the bottom. You may want to have a pair of pointy tweezers to grab any pieces that don't come out easily.
Look, Ma! No teeth!
Now take your wire and put the bead on it like so:
Squeeze the doll's cheeks hard so that her mouth opens as wide as possible and wedge the bead in there till it fits like this:
Looks like there's just a bit too much plastic in her mouth still. So trim it away in slivers remembering to check the fit or else you'll end up with a doll that can easily swallow a golfball like I did.
If that happens just get another throw away head and do it over. Also, don't forget to file any rough edges off her lips before you put the gag in there for good. I used this gizmo(diamond/needle file?):
Those work great for teeny tiny crevices. If you do any kind of OOAKing with 1:6 stuff you need a set of these files!
Anyway, check the fit of the gag.
It's a little lopsided so I shaved a sliver away. And she looks much better.
Then just take your string or whatever you chose to fasten your gag with et voila!
Remember, if you're going to do this for a character in a photostory get a dupilcate head to do this with! Once you cut the head to put the ballgag in, it can't be uncut!
Question? Comments?
If you look close you can see the 'drool' coming from the sides of her mouth.
I'm not sure how many people will be interested in this stuff, but I wanted to share what I did since I know at least one person is interested.
First off, practice on a cheapo throw away head. Don't ever try anything you've never done before on your 'baby'.
Tools are Exacto knife(or other craft knife/blade), earring wire thingy with the loop on the end (or a straight piece of wire that can bent into hoops on either end), something to tie it to your vic-er doll(leather, tape, string...yadda), needle nose pliers & wire cutters. Not everything is in the pic.
Choose a victim.
Begin by giving her a 'dental extraction'. If you don't know what that is, carefully take your blade and slooooowly cut her teeth out. I normally start from the left top side slice to the right, then go from right to left on the bottom. You may want to have a pair of pointy tweezers to grab any pieces that don't come out easily.
Look, Ma! No teeth!
Now take your wire and put the bead on it like so:
Squeeze the doll's cheeks hard so that her mouth opens as wide as possible and wedge the bead in there till it fits like this:
Looks like there's just a bit too much plastic in her mouth still. So trim it away in slivers remembering to check the fit or else you'll end up with a doll that can easily swallow a golfball like I did.
If that happens just get another throw away head and do it over. Also, don't forget to file any rough edges off her lips before you put the gag in there for good. I used this gizmo(diamond/needle file?):
Those work great for teeny tiny crevices. If you do any kind of OOAKing with 1:6 stuff you need a set of these files!
Anyway, check the fit of the gag.
It's a little lopsided so I shaved a sliver away. And she looks much better.
Then just take your string or whatever you chose to fasten your gag with et voila!
Remember, if you're going to do this for a character in a photostory get a dupilcate head to do this with! Once you cut the head to put the ballgag in, it can't be uncut!
Question? Comments?
